SignaMax 065-1753PoE User Manual page 20

TCP/IP
DHCP Client
Enable 802.1Q
VLAN
Management
VLAN ID
Time Zone
Time Zone
Adjust For
Daylight saving
time
Current Time
17
Enable this option if you have a DHCP Server on your LAN, and
you wish the Access Point to obtain an IP address automatically.
If disable is selected, the following data must be entered.
•
IP Address - The IP Address of this device. Enter an un-
used IP address from the address range on your LAN.
•
IP Subnet Mask - The Network Mask associated with the IP
Address above. Enter the value used by other devices on
your LAN.
•
Default Gateway - The IP Address of your Gateway or
Router. Enter the value used by other devices on your LAN.
•
DNS Server - Enter the DNS (Domain Name Server) used
by PCs on your LAN.
This option is only useful if the hubs/switches on your LAN
support the VLAN standard.
Define the VLAN IDs used for management.
Choose the Time Zone for your location from the drop-down list.
If your location is currently using Daylight Saving, enable the
Adjust for
Daylight Saving Time checkbox.
You must UNCHECK this checkbox when Daylight Saving
Time finishes.
If your location uses daylight saving, check this at the beginning
of the daylight saving period, and uncheck it at the end of the
daylight saving period.
It displays the current date and time.
SIGNAMAX LLC • www.signamax.eu