Table of Contents
Advertisement
Chapter 3
Access Point Setup
This Chapter provides details of the Setup process for Basic Operation
of your Wireless Access Point.
Overview
This chapter describes the setup procedure to make the Wireless Access Point a valid
device on your LAN, and to function as an Access Point for your Wireless Stations.
Wireless Stations may also require configuration. For details, see Chapter 4 - Wire-
less Station Configuration.
The Wireless Access Point can be configured using either the supplied Windows utility
or your Web Browser
Setup using the Windows Utility
A simple Windows setup utility is supplied on the CD-ROM. This utility can be used to
assign a suitable IP address to the Wireless Access Point. Using this utility is recom-
mended, because it can locate the Wireless Access Point even if it has an invalid IP
address.
Installation
1. Insert the supplied CD-ROM in your drive.
2. If the utility does not start automatically, run the SETUP program in the root folder.
3. Follow the prompts to complete the installation.
Main Screen
•
Start the program by using the icon created by the setup program.
•
When run, the program searches the network for all active Wireless Access Points,
then lists them on screen, as shown by the example below.
9
SIGNAMAX LLC •
3
www.signamax.eu
Advertisement
Table of Contents
