Table of Contents
Advertisement
9. Certificate setup is now complete.
802.1x Authentication Setup
1. Open the properties for the wireless connection, by selecting Start - Control Panel
- Network Connections.
2. Right Click on the Wireless Network Connection, and select Properties.
3. Select the Authentication Tab, and ensure that Enable network access control
using IEEE 802.1X is selected, and Smart Card or other Certificate is selected
from the EAP type.
Encryption Settings
The Encryption settings must match the APs (Access Points) on the Wireless network
you wish to join.
•
Windows XP will detect any available Wireless networks, and allow you to config-
ure each network independently.
56
Figure 48: Root Certificate Screen
Figure 49: Authentication Tab
SIGNAMAX LLC •
www.signamax.eu
Advertisement
Table of Contents
