Configuring The Ports - Hirschmann PowerMICE User Manual

Configuring the Ports

5 Configuring the Ports
The port configuration consists of:

Switching the port on and off
 Selecting the operating mode

Activating the display of connection error messages

Configuring Power over ETHERNET.
Switching the port on and off

In the state on delivery, all the ports are switched on. For a higher level of
access security, switch off the ports at which you are not making any
connection.
 Select the
Basics:Port Configuration dialog.
 In the "Port on" column, select the ports that are connected to
another device.
Selecting the operating mode

In the state on delivery, the ports are set to the "Automatic configuration"
operating mode.
Note: The active automatic configuration has priority over the manual
configuration.
 Select the
Basics:Port Configuration dialog.
 If the device connected to this port requires a fixed setting
– select the operating mode (transmission rate, duplex mode) in the "Manual
configuration" column and
– deactivate the port in the "Automatic configuration" column.
UM Basic Configuration L3P
Release 7.1 12/2011
81