System Monitor - Hirschmann PowerMICE User Manual

Access to the user interfaces

1.1 System Monitor

The system monitor enables you to

select the software to be loaded

perform a software update

start the selected software

shut down the system monitor

delete the configuration saved and

display the boot code information.
Opening the system monitor

 Use the terminal cable (see accessories) to connect
– the V.24 socket (RJ11) to
– a terminal or a COM port of a PC with terminal emulation based on
VT100
(for the physical connection, see the "Installation" user manual).
Speed 9,600 Baud
Data 8 bit
Parity None
Stopbit 1 bit
Handshake Off
Table 1: Data transfer parameters
 Start the terminal program on the PC and set up a connection with the
device.
When you boot the device, the message
"Press <1> to enter System Monitor 1"
appears on the terminal.
16
1.1 System Monitor
UM Basic Configuration L3P
Release 7.1 12/2011