Set time
1
In standby mode, press and hold CLOCK
for 2 seconds.
»
The hour digits begin to blink.
2
Press / or TIMER/VOL to set the
hour.
3
Press OK or
to confi rm.
»
The minute digits begin to blink.
4
Press / or TIMER/VOL to set the
minute.
»
[12 HR] begins to blink.
5
Press / or TIMER/VOL to select the
12/24 hour format.
6
Press OK to confi rm.
Turn on
1
Press .
»
The unit switches to the last selected
source.
Switch to standby
1
Press
again to switch the unit to
standby mode.
»
The clock (if set) appears on the
display panel.
EN
15