Connect Power; Connect Tv Antenna; Install Remote Control Battery - Philips AJL750 User Manual

Philips kitchen clock radio user manual
Hide thumbs

Advertisement

Table of Contents

Connect power

Caution
Risk of product damage! Ensure that the power
voltage corresponds to the voltage printed on
the back or underside of the apparatus.
Risk of electric shock! When you unplug the
AC power cord, always pull the plug from the
socket. Never pull the cord.
Before connecting the AC power cord, ensure
you have completed all other connections.
Note
The type plate is located on the rear of the
main unit.
1
Connect the AC power cord to the wall
outlet.
Fasten the power cord into cable clip
14
EN
1
To prevent the power cord hanging
down, adjust the length of the power
cord and fasten it into the cable clip.

Connect TV antenna

You can connect the unit to the supplied
antenna or home antenna to receive TV
program.
1
Connect the antenna to the ANTENNA
jack.
Tip
For better reception, connect the unit to
home antenna.

Install remote control battery

Caution
Danger of explosion if battery is incorrectly
replaced. Replace only with the same or
equivalent type.
Risk of explosion! Keep batteries away from
heat, sunshine or fi re. Never discard batteries
in fi re.
Risk of decreased battery life! Never mix
different brands or types of batteries.
Risk of product damage! When the remote
control is not used for long periods, remove
the batteries.
Note
Batteries contain chemical substances, they
should be disposed of properly.
Perchlorate Material - special handling may
apply. See www.dtsc.ca.gov/hazardouswaste/
perchlorate.
1
Open the battery compartment.
2
Insert one CR2025 battery with correct
polarity (+/-) as indicated.
3
Close the battery compartment.

Advertisement

Table of Contents
loading

  Related Manuals for Philips AJL750

This manual is also suitable for:

Ajl750/37