Turn On; Set Time And Date - Philips AJ7400 User Manual

Turn on

• Press and hold
» The unit switches to the last listened
source.
Switch to standby
• Press and hold
switch the unit to standby mode.
» The time and date (if set) appear on
the display panel.
Select source
• Press /SOURCE repeatedly to select
from DOCK 1, DOCK 2, FM, AUDIO IN
and BT.
• You can also press
DOCK 2 to select the DOCK 1 and
DOCK 2 source directly.

Set time and date

1
In standby mode, press and hold
TIME for 2 seconds.
» [24H ] begins to blink, and you can
hear a beep.
2
Press /TUNE+ or
the 12/24 hour format.
3
Press OK/ DOCK 2 to confirm.
» 00:00 will display, and the hour digits
begin to blink.
4
Repeat steps 2-3 to set the hour, minute,
day, month and year.
Tip
•
In 12 hour format, [MONTH--DAY] is displayed.
•
in 24 hour format, [DAY--MONTH] is displayed.
8 EN
/SOURCE.
/SOURCE again to
DOCK 1 or OK/
/SET
/TUNE- to select
Note
•
When iPod/iPhone/iPad is connected, the docking
unit synchronizes time from the iPod/iPhone/iPad
automatically.