4 Play
Watch TV
Note
•
Before you start, ensure that you have
connected the antenna to the unit.
•
Make sure you are in an area with suffi cient
signal coverage. You can check the signal
coverage with the TV broadcast authority of
your country or visit www.philips.com/support.
Lift up TV panel
1
Press PUSH at the bottom of the set to
release TV panel.
2
Pull down the panel.
3
Turn around the panel to face the screen.
4
Adjust the screen to a suitable angle.
Setup your TV
For the fi rst-time use:
1
Press ATSCTV to enter TV mode.
»
[Atsc] (Atsc) is displayed.
» First time installation is displayed on
the TV panel.
2
Press / to switch to an item.
3
Press / to select an option.
4
Select Air/Cable connecting.
»
Auto search starts.
»
All available TV channels will be
searched and stored.
Normally set up your TV:
1
During play, press SETUP.
2
Press / to switch to an item.
3
Press / to select an option.
•
Select menu language.
•
Turn on/off caption.
16
EN
•
Set time zone, daylight saving time,
and time format.
•
Select Air/Cable connecting.
•
Auto scan/Manual scan.
Play options
1
During play, press OPTIONS to select
play options.
2
Follow the on-screen instructions.
Play from an external device
You can also listen to an external audio device
through this unit.
1
Press PUSH at the bottom of the set to
release TV panel.
2
Pull down the panel.
3
Turn around the panel to face the rear of
the panel.
4
Open the door to get the MP3 link cable.
5
Connect the built-in MP3 link cable to the
headphone jack on an external device.
6
Press MP3 LINK to select the MP3 link
source.
»
[AUX IN] (AUX IN) is displayed for
fi ve seconds.
7
Start to play the device (see the device
user manual).