3
Get started
Always follow the instructions in this chapter in
sequence.
Install batteries
The batteries can only back up clock and alarm
settings.
Caution
•
Risk of explosion! Keep the batteries away from heat,
sunshine or re. Never discard batteries in re.
•
Batteries contain chemical substances, so they should
be disposed of properly.
•
Do not mix battery types: e.g. alkaline with carbon
zinc. Only use batteries of the same type for the set.
Insert 2 AAA batteries (not provided) with
correct polarity (+/-) as illustrated.
Connect power
Caution
•
Risk of product damage! Make sure that the power
voltage corresponds to the voltage printed on the
back or underside of the clock radio.
•
Risk of electrical shock! When you unplug the power
cord, always pull the plug from the socket. Never pull
the cord.
•
Use only the AC power adapter speci ed in the
manufacturer or sold with this unit.
Note
•
The type plate is located at the bottom of the clock
radio.
4
EN
Connect the power adaptor to the wall outlet.
Set time
Note
•
You can only set time in standby mode.
1
In standby mode, press and hold
for more than 2 seconds.
2
Press
TUN
<12 HR>
hour format, then press
TIME
to con rm.
HR
3
Press
to set hour and
minute, then press
4
Press
TUN
[DD-MM-YY]
year
to con rm.
5
Press
TUN
FROM RADIO>
SET TIME
press
[SAVED]
is displayed and the time is set.
Turn on
1
Press
to turn on the clock radio.
The unit switches to the last selected
source.
2
To switch to standby mode, press
The real-time clock is displayed.
Note
•
This product will switch to standby mode after 15
minutes of inactivity.
SET TIME
<24 HR>
to select
or
SET
MIN
to set
SET TIME
to con rm.
to set date, month and
SET TIME
, then press
<UPDATE
to select
<NO UPDATE>
or
, then
to con rm.
again.