Set Time; Turn On - Philips AJ6000/93 User Manual

Hide thumbs Also See for AJ6000/93:
Table of Contents

Advertisement

Option 2: Battery power
Caution
Batteries contain chemical substances, so they should
be disposed of properly.
Note
Batteries are not supplied with the accessories.
bAt shows on the display when the battery level is low.
1
Open the battery compartment.
2
Insert 2 batteries (type: 1.5V LR6/AA) with
correct polarity (+/-) as indicated.
3
Close the battery compartment.

Set time

1
Rotate the Third Knob to "SET TIME" to
activate clock setting mode.
» Hour and minute digits blinks.
2
Rotate the First Knob to adjust the hour.
3
Rotate the Second Knob to adjust the
minute.
4
Press OK on the First Knob to confirm.
» The setting time is displayed.
5
Rotate the Third Knob to CLOCK after
setting.
» The hour and minute digits stops
blinking.

Turn on

The clock radio turns on automatically once
your plugged in.
Switch to standby mode
Press SOURCE for 3 seconds to switch to
standby mode.
» The source indicator on the display
panel turns off.
EN
6

Advertisement

Table of Contents
loading

Table of Contents