Bosch BPT-S 5 Hybrid Installation Manual page 283

English
Tightening torque
1.5 to 1.8 Nm
0.5 to 0.6 Nm
0.6 to 0.8 Nm
Module/component
Battery converter
String inverter capacitor
Battery cover
Ventilation grille
BMM
Battery converter
EMS
Left and right side
panels
Bosch Power Tec GmbH
Appendix
Tightening torques overview
Always observe the tightening torques when you are
carrying out work on the connector block terminal
assignments (the positions given refer to Connector
block terminals, p. 104).
Terminals
For UT 10 and UT 6 (earthing above position 11
and position 7, earthing below position 4,
positions 1, 2, 4, 5, 6 and 7)
For UT 2.5 (positions 9 and 10)
Fuse terminal SI - 3118012
Always observe the tightening torques for Allen
screws, rounded head screws and hex nuts:
Screw/nut
Allen screw with washer
Allen screw with washer
Hex nut with washer
Allen screw with washer
Rounded head screw with washer
Allen screw with washer
Allen screw with washer
Hex nut (earthing)
Hex nut (inside, top)
Rounded head screw with washer
Appendix | 139
Tightening torque (Nm)
2.7
2.7
2.7
0.5
2.7
2.7
Max. 2.5 + 0.2
2.7
0.5
Storage system | Installation manual