Unpack The Storage System (Fitter) - Bosch BPT-S 5 Hybrid Installation Manual

52 | Delivery and positioning
NOTICE
NOTICE
NOTICE
Storage system | Installation manual
Material damage caused by condensation
If the device is moved from a cold environment to the
installation location, condensation may form, causing
damage to the electronics.
Only transport the device at T = –20 °C to +50 °C

and a maximum relative humidity of 95% (non-
condensing)
Before commissioning, the device must be

absolutely dry.
Before commissioning, the device must be

completely de-energised for at least 24 hours.
Material damage due to impact forces
When moving and setting down the device, electronic
equipment can be damaged by the forces of impact.
Avoid impacts

Material damage due to incorrect means of
transport
When moving the housing using a sack truck, the
housing may be damaged.
Never transport the device with a sack truck

At least two people are required to transport the

device
1. Transport the storage system to the chosen
installation location
■
The storage system is delivered by the haulage
contractor.
5.3

Unpack the storage system (fitter)

▶
Procedure
1. Remove and dispose of the packaging from the
housing and components.
2. Carefully lift the storage system off the pallet
English
Bosch Power Tec GmbH