Removing The Side Panels - Bosch BPT-S 5 Hybrid Installation Manual

English
Bosch Power Tec GmbH
2. Use the 8 mm spanner to remove the M5 hex nut
on the earthing cable
3. Remove the earthing cable
6.2: Earthing cable screw connection
4. Remove the housing cover
5. Place the cover securely to one side
■
The housing cover has been removed.
6.2.2

Removing the side panels

▶
Procedure
1. Inside the housing: At the top of the housing, use
the 8 mm spanner to remove the three M5 hex nuts
Installation | 59
Storage system | Installation manual