Bosch BPT-S 5 Hybrid Installation Manual page 238

94 | Installation
Storage system | Installation manual
Connect the side panel earthing cable (1) to the
6.32:
housing (2)
4. Place the side panel with the rounded edges facing
rearwards on the housing so that the appropriate
side panel switch plate fits into the housing frame
plate.
5. Allow the threaded bolts to engage in the holes on
the closing plate
6. At the top of the side panel: Use the 8 mm spanner
to screw on and tighten three M5 hex nuts
(tightening torque 2.7 Nm)
English
(2)
(1)
Bosch Power Tec GmbH