Battery Converter; Mounting - Bosch BPT-S 5 Hybrid Installation Manual

76 | Installation
WARNING
WARNING
Storage system | Installation manual
6.8

Battery converter

Risk of injury due to heavy weight
The heavy weight of the components may cause injury
during installation, disassembly and transport.
Transport and mount the components with two

people
Before transporting the device to the installation

location, remove the housing
Risk of injury due to sharp edges
The components have sharp edges, which can cause
hand injuries if they are not handled carefully.
Wear protective gloves

Mount the components with two people

6.8.1

Mounting

▶
Procedure
1. In the housing: Push the battery converter
diagonally upwards and carefully lower the battery
converter vertically. Slide the left- and right-hand
straps on the battery converter (1) into the
brackets in the housing (2).
2. On the bottom of the battery converter: Use the 5
mm Allen key to screw in and tighten two M6 Allen
screws (tightening torque 2.7 Nm)
English
Bosch Power Tec GmbH