Placing Long Paper In The Adf; Specifications Of Long Paper - Epson DS-360W User Manual

User's Guide
Note:
❏ You can preview the scanned image using Epson Scan 2. If you want to preview, load only the first page of your originals
into the input tray. The page is ejected after it is scanned and a preview image is generated. Load the ejected page again
together with the rest of the originals.
❏ If you set a batch of originals and perform previewing, the second page will be fed a little bit into the ADF. Open the
scanner cover to remove it from the ADF, and then load the page again together with the first page and the rest of the
originals.
❏ Also if you cancel scanning in the middle of scanning a batch of originals, the next page will be fed a little bit into the
ADF and scanning stopped. You need to open the scanner cover to remove the page.
Related Information
"Basic Scanning" on page 52
&
"Advanced Scanning" on page 63
&

Placing Long Paper in the ADF

Specifications of Long Paper

These are the specifications for long paper that you can load into the scanner.
Size
Width: 50.8 to 215.9 mm
(2.0 to 8.5 in.)
Length: 368.3 to 1,117.6 mm
(14.5 to 44 in.)
Specifications of Originals and Placing Originals
Thickness
51.8 to 128 g/m2
33
Paper Type
Plain paper
Fine paper
Recycled paper
Loading Capacity
1 sheet