Creating Scanned Images To Suit Your Needs; Image Adjustment Features - Epson DS-360W User Manual

User's Guide
The light on the scanner turns on, and the Automatic Feeding Mode window is displayed on your
computer.
5. Make sure the feed selector on the scanner is set correctly.
To scan originals using ADF, set the feed selector to
feed selector to (card).
6. Adjust the edge guides, and then place the original in the ADF until it is fed automatically into the ADF.
If you want to scan a plastic card, insert the card into the card slot.
Scanning starts automatically.
7. After scanning stops, place the next original in the ADF.
Repeat this procedure until you have scanned all originals.
Note:
Make sure that the feed selector is set correctly before placing originals.
8. After you have scanned all originals, press the
Note:
❏ You can also close Automatic Feeding Mode by pressing Finish on the Automatic Feeding Mode window displayed
on your computer.
❏ You can make timeout settings to finish Automatic Feeding Mode.
Select Settings on the Document Source list to open the Document Source Settings window. Set Automatic Feeding
Mode Timeout (minutes) on the window.
The scanned image is saved to the folder you specified.
Related Information
"Specifications of Originals and Placing Originals" on page 24
&

Creating Scanned Images to Suit Your Needs

Image Adjustment Features

You can adjust scanned images using the features on the Advanced Settings tab in Epson Scan 2.
Except for a few features, you can check the adjustment results in the preview window.
Advanced Scanning
(ADF). To scan a plastic card using the card slot, set the
button on the scanner to close Automatic Feeding Mode.
64