Using The Scanner On The Battery; Notice On Using The Battery; Charging The Battery; Battery Charging Precautions - Epson DS-360W User Manual

User's Guide

Using the Scanner on the Battery

Notice on Using the Battery

❏ When the AC adapter is not connected and the scanner is connected by USB 2.0 or Wi-Fi to the computer, the
scanner runs on the battery. If the battery becomes runs out and the battery light turns off, you cannot scan. We
recommend connecting the AC adapter to the scanner when the battery lamp starts flashing.
❏ When the scanner is run on USB 3.0 bus power, the scanning speed may become slower when the battery is
running low and the battery light starts flashing fast.
Related Information
"Buttons and Lights" on page 15
&

Charging the Battery

Battery Charging Precautions

❏ The battery slowly runs down even when you do not use the scanner. Charge the battery before you run the
scanner using the battery.
❏ We recommend turning off the scanner when not in use to save the battery. You can also set the scanner to turn
off automatically after a specified period of time.
❏ The battery's usable time is shorter in low temperature environments, even if you have charged the battery fully.
❏ You do not need to wait for the battery to run out before charging it.
❏ The battery may be hot right after it is charged or used; this is normal.
❏ The battery cannot be charged or the battery may deteriorate if you charge it in low or high temperatures.
Charge the battery within the guaranteed charging temperature range.
❏ If the battery runs out quickly even after it has been fully charged, the battery may be at the end of its service
life. Contact Epson support to replace the battery.
❏ If you do not use the scanner for a long time, charge the battery using the AC adapter on a regular basis to avoid
letting it run out.
Using the Scanner on the Battery
21