Bridging Additional Wds Supported Devices - TRENDnet TEW-814DAP User Manual

TRENDnet User's Guide
• 802.11 n-mode: Select the 802.11 mode you would like to the wireless band to operate on.
Note: This device operates in 5GHz wireless mode, below options of 802.11n is based on 5GHz 802.11.
o 802.11a only: Select this option if you only have 802.11a wireless devices.
o 802.11n only: Select this option if you only have 802.11n wireless devices.
o Mixed 802.11n and 802.11a: Select this option if you will be using both 802.11n and 802.11a wireless devices.
o 802.11ac only: Select this option if you only have 802.11ac wireless devices.
o Mixed 802.11n and 802.11ac: Select this option if you have both 802.11n and 802.11 ac wireless clients.
o Mixed 802.11ac, 802.11n and 802.11a: Default setting, select this option if you are uncertain what your wireless devices support.
• Wireless Channel: Click the drop-down list and select the desired Channel for wireless communication. The goal is to select the Channel that is least used by neighboring wireless
networks and the channel used must match on all WDS devices.
• Channel Width: Select the appropriate channel width for your wireless network. This setting only applies to 802.11n. For greater 802.11n performance, select Auto 20/40/80MHz
(Options: 20MHz or 20/40MHz (Auto)). It is recommended to use the default channel bandwidth settings and that similar setting is applied on all WDS devices.
• Remote AP Mac: Enter the wireless MAC address of the remote WDS supported access point or router.
• Bridge Security: Select and configure the wireless security to be used on the WDS connection. This setting must be applied on all WDS devices.

Bridging additional WDS supported devices

For a point-to-multipoint (hub and spoke) WDS configuration, the AP2 (spoke) configuration procedure in the previous section
creating additional WDS bridges to AP1 (hub).
For multiple point-to-point wireless WDS bridge links, you can follow the entire configuration procedure in the previous section
The TEW-814DAP can support up to 8 wireless WDS bridge connections.
© Copyright 2015 TRENDnet. All Rights Reserved.
"Creating a Wireless Bridge" page 23 can be used when
"Creating a Wireless
Bridge" on page 23.
TEW-814DAP
26