Changing Clip Server Settings - JVC KY-PZ100WU Instructions Manual

Changing Clip Server Settings

You can make direct changes to the server and
directory settings that are specified in [Clip
Server] on the [Settings] screen for uploading
recorded clips in the microSD card to the FTP
server.
.
.
A Server
For selecting the FTP server.
B Alias
For setting a name to distinguish the settings of
this camera recorder.
The name set in this item will appear on the [FTP
Upload] action screen of the clip list display.
* Enter not more than 31 characters.
C Protocol
For setting the protocol of the FTP server to be
connected.
FTP:
0
Protocol that does not encrypt the incoming
and outgoing data.
SFTP:
0
Protocol that encrypts incoming and
outgoing data using SSH.
FTPS:
0
Protocol that encrypts incoming and
outgoing data using SSL or TLS. It uses an
implicit mode (starts encrypted
communication once connection starts).
FTPES:
0
Protocol that encrypts incoming and
outgoing data using SSL or TLS. It uses an
explicit mode (starts encrypted
communication after permission is granted).
ZIXI:
0
Select this item when transferring files via the
ZIXI server.
[Setting Values: RFTP, SFTP, FTPS,
FTPES, ZIXI]
Memo :
To use the "ZIXI" setting, a dedicated server is
0
needed separately.
If "ZIXI" is set, the resume function is enabled.
A
0
D Server
For setting the server name ("mystation.com",
etc.) or the IP address ("192.168.0.1", etc.) of
B
the FTP server.
C
* Enter not more than 127 characters using
D
single-byte alphanumeric characters (a to z,
E
F 0 to 9), single-byte hyphen [-], or dot [.].
G
E Port
H
I
Enter the FTP server port number to use using
an integer between 1 and 65535.
J
The default value varies with the Protocol
setting.
(FTP: 21, SFTP: 22, FTPS: 990, FTPES: 21,
ZIXI: 2088)
F Dir. Path
Enter the path name for the directory to upload
to ("/pub", "/home/user", etc.)
* Enter not more than 127 characters.
G Username
Enter the user name for connecting to the FTP
server.
* Enter not more than 31 characters.
H Password
Enter the password for connecting to the FTP
server.
* Enter not more than 31 characters.
I Passive Mode
For setting whether to set the communication
mode used for file transfer to the passive mode.
Set to "On" if the camera is inside a firewall, and
a connection from the FTP server to the camera
cannot be established.
[Setting Values: On, ROff]
Memo :
When [Protocol] is set to "SFTP", this item
0
appears as "---" and cannot be selected.
J [Save]/[Cancel] Button
For saving the settings or canceling the action.
91
Changing Settings