Tally Lamp - JVC KY-PZ100WU Instructions Manual

Tally Lamp

This is the indicator lamp for recording and
warning.
The operation changes according to the menu
settings.
The lamp appears blinking such as when the
remaining level of the microSD card is running low,
or when a system error occurs on the camera.
* To configure the setting, go to [Main Menu] B
[System] B [Tally Lamp].
(A P66 [ Tally Lamp ] )
Tally lamp
.
Display Type
Information Running with menu settings (recording/
live streaming/external control)
Alarm If power supplied from the LAN terminal is
not PoE+
Insufficient space inside microSD card
(Remaining recording time is less than 3
minutes)
Live streaming communication error
or waiting to be connected
Warning System error
Set Status
Memo :
Blinking takes priority over lighting up.
0
You can adjust the brightness of the tally lamp
0
in [Main Menu] B [System] B [Tally Lamp] B
[Brightness].
(A P66 [ Brightness ] )
When [System] B [Loop Rec] is set to "On",
0
alarm and warning displays when there is
insufficient or no microSD card space will not be
shown.
When [Main Menu] B [System] B [Tally Lamp]
0
is set to "External" or "Off", alarm and warning
displays when there is insufficient or no microSD
card space will not be shown.
Menu Setting
Other than "Off"
None
Record
0
Record/Live
0
streaming
Live streaming
0
Record/Live
0
streaming
None
Tally Lamp Status
Lights up
Blinks once in 1
second
Blinks twice in 1
second
25
Tally Lamp