Setting The User's Bit - JVC KY-PZ100WU Instructions Manual

Recording Time Code in Continuation of
the Recorded Time Code on microSD
Card
This camera recorder is equipped with the time
code reader.
1 Set [TC/UB] B [TC Generator] to "Regen".
When the camera recorder enters from
0
recording standby mode to recording mode,
it reads the time code already recorded on
the microSD card and records the new time
code in continuation of that value.
The same data as the user's bit already
0
recorded on the microSD card is recorded.
Memo :
When [TC/UB] B [TC Generator] is set to
0
"Regen", the framing mode of the time code
follows the settings in [TC/UB] B [Drop Frame]
instead of the clip settings.
(A P58 [ Drop Frame ] )
50
Setting Time Code Generator

Setting the User's Bit

You can add the date, time or an 8-digit
hexadecimal number as the user's bit to the
recorded image.
Selecting a Recording Mode
Recording date/time information to the user's
bit
1 Set [Main Menu] B [TC/UB] B [UB Mode] to
"Date" or "Time", and press the Set button
(Set).
(A P58 [ UB Mode ] )
The date or time information is recorded to the
user's bit.
Memo :
When "Date" or "Time" is set, [Preset] appears
0
as "-" and cannot be set.
"Time" is displayed in the 24-hour format.
0
Presetting the User's Bit
Recording arbitrary information (8-digit
hexadecimal) to the user's bit
1 Set [Main Menu] B [TC/UB] B [UB Mode] to
"Preset", and press the Set button (Set).
(A P58 [ UB Mode ] )
.
Memo :
When [TC/UB] B [TC Generator] is set to
0
"Regen", the parameter is displayed as "Regen"
and cannot be selected.
(A P58 [ TC Generator ] )
1