Tc/Ub Menu - JVC KY-PZ100WU Instructions Manual

Tilt Up Limit/Tilt Down Limit
Sets a limit on the vertical (up/down) range of the
tilt operation. Selecting Set sets the current
position as the tilt limit. Movement beyond this point
is not allowed.
Selecting Release releases the restriction.
[Setting Values: Set, RRelease]
Memo :
The operation speed varies depending on
0
whether an AC adapter or a PoE+ power supply
is used.
When an AC adapter is
used
During PoE+ power supply : Maximum 200°/S

TC/UB Menu

Menu screen for setting time code and user's bit.
This item cannot be selected while recording is in
progress.
TC Generator
For setting the operation of the time code.
Free Run:
0
The time code operates in the run mode at all
times regardless of the recording status. It
continues to run even when the power of the
camera recorder is turned off.
Rec Run:
0
The time code operates in the run mode during
recording. It continues to run in the order of the
recorded clips as long as the microSD card is
not replaced. If the microSD card is removed
and recording is made on another card, time
code will be recorded on the new card from
where it was left off in the previous card.
Regen:
0
The time code operates in the run mode during
recording. When the microSD card is replaced,
the last time code recorded on the card is read
and recorded on a new card so that the time
code continues in running order.
[Setting Values: Free Run, RRec Run, Regen]
TC Preset
For setting the time code (hour, minute, second,
frame).
Display : Drop setting 02:02:25.20
: Non Drop setting 02:02:25:20
Memo :
When [TC/UB] B [TC Generator] is set to
0
"Regen", the parameter is displayed as "Regen"
and cannot be selected.
58
Pan/Tilt Menu
: Maximum 300°/S
UB Mode
For setting the recording mode of the user's bit.
Date:
0
Records the date.
Time:
0
Records the time.
Preset:
0
Records according to the preset setting.
(A P50 [Setting the User's Bit] )
[Setting Values: Date, Time, RPreset]
Memo :
If UB Mode is set to "Time", the user's bit
0
operates in the 24-hour format even if the LCD
display on the web browser (Live View) screen
or screen of the externally connected monitor is
in the 12-hour format.
9 Preset
For setting the user's bit. (Digit by digit)
Display : AB CD EF 01
(A P50 [Presetting the User's Bit] )
Memo :
When [UB Mode] is set to "Date" or "Time", this
0
item appears as "---" and preset is disabled.
When [TC/UB] B [TC Generator] is set to
0
"Regen", the parameter is displayed as "Regen"
and cannot be selected.
Drop Frame
For setting the framing mode of the time code
generator.
Non Drop:
0
Internal time code generator works in the non-
drop-frame mode. Use this setting when placing
emphasis on the number of frames.
Drop:
0
Internal time code generator works in the drop-
frame mode. Use this setting when placing
emphasis on the recording time.
[Setting Values: Non Drop, RDrop]
Memo :
This item can be set only when [Main Menu] B
0
[System] B [Record Set] B [Record Format] B
[Frame Rate] is set to "60p", "30p", or "60i".
When [Frame Rate] is "50p", "25p", or "50i", this
item appears as "---" and cannot be selected.
(A P67 [ Frame Rate ] )