Setting The Date; Stopwatch - Seiko V172 Instructions Manual

SETTING THE DATE

l Before setting the date, be sure to set the main time.
Date
1. It is necessary to adjust the date at the end of February and 30-day months.
2. Do not set the date between 9:00 p.m. and 1:00 a.m. Otherwise, the date may not change properly.
3. Do not press Button B when the crown is at the first click position, as this will move the ALARM
hands.
12
CROWN
Pull out to the first click.
t
Turn clockwise until the desired date
appears.
t
Push back into the normal position.

STOPWATCH

l The stopwatch can measure up to 60 minutes in 1/5-second increments.
When the measurement reaches 60 minutes, the stopwatch automatically
stops.
l Split time measurement is available.
45
I Before using the stopwatch, be sure to check that the crown is set at the normal
position and that the STOPWATCH hands are reset to the "0" position.
• If the STOPWATCH hands do not return to the "0" position when the stopwatch is reset
to "0," follow the procedure in "SETTING THE TIME AND ADJUSTING THE STOPWATCH
HAND POSITION".
STOPWATCH minute hand
A
60
15
MIN.
30
STOPWATCH 1/5-second hand
B
13