Single-Time Alarm - Seiko V172 Instructions Manual

SINGLE-TIME ALARM

l The alarm can be set to ring only once at a designated time within the
coming 12 hours.
l The alarm time can be set in one minute increments.
l You can preview the alarm sound by using the sound demonstration
function.
ALARM TIME SETTING
I Before using the alarm, check that the ALARM hands are adjusted to
the current time. (See
STOPWATCH HAND POSITION")
12
9 3
ALARM
B
6
ALARM hour hand ALARM minute hand
16
"SETTING THE TIME AND ADJUSTING THE
CROWN Pull out to the first click.
t
B
Press repeatedly to set the
desired alarm time.
The ALARM hands move quickly if
Button B is kept pressed.
t
Push back into the normal
CROWN
position.
The alarm is automatically engaged.
1. The single-time alarm cannot be set for a time more than 12 hours ahead of the current time. While
you keep Button B pressed to advance the ALARM hands quickly, they stop when they indicate the
current time and the alarm is disengaged. In that case, release Button B, and then, press and hold
the button again to set the ALARM hands to the desired time.
2. While the crown is at the normal position, the ALARM hands indicate the current time when the
alarm is disengaged and the designated alarm time when it is engaged.
l HOW TO STOP THE ALARM
At the designated time the alarm rings for 20 seconds, and it is automatically
disengaged as it stops. To stop it manually, press Button A or B.
1. While the stopwatch is measuring, the alarm rings differently than usual. However, this is
not a malfunction.
2. While the alarm is ringing, pressing Button A or B will only stop the alarm, and no
stopwatch operation can be made.
ALARM SOUND DEMONSTRATION FUNCTION
A
CROWN
t
A
Pull out to first click.
Press for longer than 3 seconds. The
alarm sound can be heard while Button A
is kept pressed.
17