Setting The Time And Adjusting The Stopwatch Hand Position - Seiko V172 Instructions Manual

SETTING THE TIME AND ADJUSTING
THE STOPWATCH HAND POSITION
l This watch is designed so that the following adjustments are made with the
crown at the second click position:
1) main time setting
2) alarm hand adjustment
3) stopwatch hand position adjustment
Once the crown is pulled out to the second click, be sure to check and adjust
1) and 2) at the same time. If needed, 3) should also be adjusted then.
Pull out to the second click when the second hand is at the 12 o'clock
CROWN
position.
1. MAIN TIME SETTING
Hour hand
Minute hand
60
30
Small second
hand
8
Turn to set the hour and
CROWN
minute hands.
1. When the stopwatch is or has been measuring, if the crown is pulled out to the second click, it will
automatically reset the STOPWATCH hands to "0."
2. If the alarm has been set and the crown is pulled out to the second click, the ALARM hands will turn
to indicate the current time.
3. It is recommended that the hands be set to the time a few minutes ahead of the current time, taking
into consideration the time required to set the ALARM hands and to adjust the STOPWATCH hand
position if necessary.
4. When setting the hour hand, be sure to check that AM/PM is correctly set. The watch designed so
that the date changes once in 24 hours.
5. When setting the minute hand, first advance it 4 to 5 minutes ahead of the desired time and then
turn it back to the exact minute.
2. ALARM HAND ADJUSTMENT
Minute hand
Hour hand
60
30
12
9 3
B
ALARM
6
ALARM hour hand ALARM minute hand
I Set the ALARM hands to the time
the main time hands indicate.
Press repeatedly to set the ALARM
B
hands to the time indicated by the
main time hands.
The ALARM hands move quickly if Button
B is kept pressed.
9