Advertisement
If your watch has a screw lock type crown, unscrew it before any crown operation.
Always keep the crown locked unless it is necessary for operating the crown.
[To unscrew the crown]
Turn the crown counterclockwise (downward) to unscrew it. The crown is unlocked and can be operated.
[To screw the crown in]
Upon completion of the crown operation, screw the crown in completely until it stops by turning it clockwise (upward) while gently pressing it back into the original position.
This watch is designed so that the following are all made with the crown at the second click position:
If the crown is pulled out to the second click, be sure to check and adjust 1), 2) and 3) at the same time.
Pull out to second click when the small second hand is at the 12 o'clock position.
Turn to set the hour and minute hands.
Set the ALARM hands to the time the main time hands indicate.
Press repeatedly to set ALARM hands to the time indicated by the main time hands.
* The ALARM hands move quickly if button B is kept pressed.
Set the WORLD TIME hands to the time of the city in the time zone where you are.
Press for 2 seconds.
* The city hand turns a full circle.
Press repeatedly to set the city hand to point at the name of the selected city on the bezel.
* The city hand moves in 0.5-second increments.
* The hand moves quickly if button B is t kept pressed.
Press for 2 seconds.
* The WORLD TIME hour and minute hands t turn a full circle.
Press to set the WORLD TIME hour and minute hands to the time of the city to which the city hand is set.
* The hands move quickly if button B is kept pressed.
* The time of the selected city is displayed in the 24-hour indication.
The ALARM and WORLD TIME hands can be readjusted in the following order by pressing button for 2 seconds.
After all the adjustments are completed, push back in to normal position in accordance with a time signal.
IN CASE YOU ARE IN AN AREA WHERE TIME DIFFERENCE FROM GMT IS NOT SET ON A ONE HOUR BASIS, PLEASE FOLLOW INSTRUCTIONS 1, 2, AND 3
Ex. Setting main time and alarm hands to 10:10 a.m. in New Delhi, and the city hand and world time hands to London (GMT) at 4:40 a.m.
Pull out to second click when the small second hand is at the 12 o'clock position.
Turn to set the hour and minute hands.
Set the ALARM hands to the time the main time hands indicate.
Press repeatedly to set ALARM hands to the time indicated by the main time hands.
* The ALARM hands move quickly if button B is kept pressed.
Set the WORLD TIME hands to the time of a city in a time zone where you know the correct time.
Press for 2 seconds.
* The city hand turns a full circle.
Press repeatedly to set the city hand to point at the name of the selected city on the bezel.
* The city hand moves in the 0.5-second increments.
* The hand moves quickly if button B is kept pressed.
Press for 2 seconds.
* The WORLD TIME hour and minute hands turn a full circle.
Press to set the WORLD TIME hour and minute hands to the time of the city to which the city hand is set.
* The hands move quickly if button B is kept pressed.
* The time of the selected city is displayed in the 24-hour indication.
The ALARM and WORLD TIME hands can be readjusted in the following order by pressing button for 2 seconds.
After all the adjustments are completed, push back in to normal position in accordance with a time signal.
Before setting the date, be sure to set the main time.
The time of a selected city is displayed in the 24-hour indication by 2 small hands.
Press repeatedly to set the city hand to the city on the bezel whose time you wish to know.
* The city hand turns clockwise or counterclockwise by pressing Button A or B respectively.
* It moves quickly if the respective button is kept pressed.
The WORLD TIME hour and minute hands move automatically to indicate the time of the selected city in the 24-hour indication.
The initial adjustment of the WORLD TIME hands should be performed at the same time as the city hand setting. If the WORLD TIME hands are not correctly set, the precise time of the selected city will not be displayed.
In some products, the arrow marks are printed below the names of cities where daylight saving time is adopted.
To display the local time of one of these cities during the period when daylight saving time is effective, set the city hand to the position where the arrow mark is pointing.
The daylight saving time may change in some areas or countries when they are so decided by the countries concerned.
GMT=Greenwich Mean Time/UTC=Coordinated Universal Time (As of September 2014)
GMT/UTC ±(hours) | Marking on the bezel/dial | Name of city | Other cities | |
City code | City name | |||
0 | LON | LONDON | London | Casablanca, Dakar |
+1 | PAR/ROM | ROME/ PARIS | Rome Paris | Amsterdam, Frankfurt, Berlin |
+2 | CAI | CAIRO | Cairo | Athens, Istanbul, Kiev, Cape Town, Tripoli |
+3 | JED | JEDDAH | Jeddah | Mecca, Nairobi |
+4 | DXB | DUBAI | Dubai | |
+5 | KHI | KARACHI | Karachi | Tashkent |
+6 | DAC | DHAKA | Dhaka | |
+7 | BKK | BANGKOK | Bangkok | Phnom Penh, Jakarta |
+8 | HKG | HONG KONG | Hong Kong | Manila, Beijing, Singapore |
+9 | TYO | TOKYO | Tokyo | Seoul, Pyongyang |
+10 | SYD | SYDNEY | Sydney | Guam, Khabarovsk |
+11 | – | NOUMEA | Noumea | Solomon Islands |
+12 | WLG | WELLINGTON | Wellington | Fiji Islands, Auckland |
–11 | – | MIDWAY | Midway Islands | |
–10 | HNL | HONOLULU | Honolulu | |
–9 | ANC | ANCHORAGE | Anchorage | |
–8 | LAX | LOS ANGELES | Los Angeles | San Francisco, Vancouver |
–7 | DEN | DENVER | Denver | Edmonton (Canada) |
–6 | CHI | CHICAGO | Chicago | Mexico City |
–5 | NYC | NEW YORK | New York | Washington D.C., Montreal, Toronto |
–4 | SCL | SANTIAGO | Santiago | Santo Domingo, La Paz |
–3 | RIO | RIO DE JANEIRO | Rio de Janeiro | Buenos Aires |
–2 | – | |||
–1 | – | AZORES | Azores | Cape Verde Islands |
The markings on the bezel/dial may differ depending on the model.
Before using the alarm, check that the ALARM hands are adjusted to the current time. (See "SETTING THE TIME AND ADJUSTING ALARM AND WORLD TIME HANDS.")
Pull out to first click.
Press repeatedly to set the desired alarm time.
* The ALARM hands move quickly if button B is kept pressed.
Push back in to normal position.
* The alarm is automatically engaged.
At the designated time the alarm rings for 20 seconds, and it is automatically disengaged as it stops. To stop it manually, press button A or B.
Pull out to first click.
Press and hold until the ALARM hands stop and indicate the current time.
Push back in to normal position.
* To correct the alarm time you have set, follow the procedure described in "ALARM TIME SETTING".
Pull out to first click.
Press and hold for more than 2 seconds.
* The alarm sound can be heard t while the button is kept pressed.
Push back in to normal position.
The miniature battery which powers your watch should last approximately 3 years. However, because the battery is inserted at the factory to check the function and performance of the watch, its actual life once in your possession may be less than the specified period. When the battery expires, be sure to replace it as soon as possible to prevent any mal function. For battery replacement, we recommend that you contact an AUTHORIZED SEIKO DEALER and request SEIKO SR927W battery.
* If the alarm rings for more than 20 seconds a day, the battery life may be less than the specified period.
* After the battery is replaced with a new one, set the time/calendar and adjust alarm and world time hands.
Battery life indicator
When the battery nears its end, the small second hand moves at two-second intervals instead of normal one-second intervals. In that case, have the battery replaced with a new one as soon as possible.
* While the small second hand is moving at two-second intervals, the alarm will not ring even if it is engaged. This is not a malfunction.
* The watch remains accurate while the small second hand is moving at two-second intervals.
* The specifications are subject to change without prior notice for product improvement.
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Thank you! Your question has been received!
Need Assistance?
Do you have a question about the 5T82 that isn't answered in the manual? Leave your question here.