Openhub Touch Screen Consoles - Stairmaster Gauntlet Owner's Manual

OPERATION - OPENHUB TOUCHSCREEN
CONSOLES
DISPLAY MEASUREMENTS
Time Current total workout time
Segment
Timer
Counts down time left in current
segment
Level Current level, from 1-20
SPM Current speed in Steps per Minute
Steps
Current total number of steps climbed
Floors
Current total number of floors climbed
Calories Accumulated calories burned
Cal/Hour Current rate of calorie burn
WATTS Current user Watts
METS Current user METS
Heart Rate Current HR in beats per minute,
if available
CONSOLE KEY FUNCTIONS
Bluetooth Device Pairing: Pushing the button puts the console into discover mode. The console will be available for
pairing for up to 60 seconds to pair with a compatible App. The button will flash while searching for pairing, and the
display will show the unique console code. Once a device is paired with the console, the light will stop flashing and
remain on to indicate the connection. Visit our website for a list of compatible Apps.
QUICK START Key: Enables manual operation using a default weight, LEVEL of "1", and a default time limit. NOTE:
Default time and weight are adjustable through Maintenance Mode.
Fan Button: Cycles the fan between three settings: High, Low and Off
FUNCTION NOTE:
The 8-Series Gauntlet has a safety feature to help prevent users from accidentally increasing the machine speed to a level that is
too high for them. When pressing the level up button to increase speed, there are two stop points at level 10 and level 15 which
function as follows: when increasing level, the machine will not allow the user to increase the level past the stop point until the
actual machine speed has reached the set level. For example, if a user is at level 5 and repeatedly pressed the level up button, it
will allow the set level to go up to level 10, but no further until the actual machine speed has reached level 10. Once the machine
speed has reached the set level, the user can increase the level further.
22