Anti-Theft Alarm System - Seat IBIZA Owner's Manual

– Maximum time allowed for synchronising is 30 seconds.
– The normal key is used to activate the ignition, and the key with
the remote control is the key to be programmed.
– Check that the car is open before commencing programming.
– Place the key without remote control in the contact inside the
steering and ignition lock.
– Use the key with remote control and mechanically lock the
vehicle from the driver's door.
– Open and close the driver's door lock mechanically, using the
remote control key.
– At the same time press the button
key.
– Complete the procedure by removing the key from the contact
It is possible that the vehicle could no longer be opened and closed with the
remote control if the button
range of the radio frequency remote control. The remote control key will have
to be resynchronised.
Spare remote control keys are available from Authorised Service Centres, they
must be matched to the locking system.
Safety First
A

on the remote control
1

is repeatedly pressed outside of the effective
Operating instructions

Anti-theft alarm system*

Description of anti-theft alarm system*
The anti-theft alarm triggers an alarm if unauthorised move-
ments are detected around the vehicle.
The anti-theft alarm makes it more difficult to break into the vehicle or steal
it. Audible and visible alarms are triggered if the car is opened using the
mechanical key, or if unauthorised access is gained to the vehicle.
The anti-theft alarm system is automatically switched on when the vehicle is
locked. To lock the door either turn the key once in the lock towards the

locking position or press button
control*. The system is activated immediately and the indicator light located
on the driver's door will flash along with the indicators indicating that the
alarm and the locking security system (double lock) have been turned on.
When the vehicle is locked the indicator lamps light up only if the alarm has
been correctly activated (all the protection zones should be correctly closed).
If any of the doors or the bonnet are open, when the alarm is connected these
will not be included in the protection zones of the vehicle. If the door or
bonnet is subsequently closed, they will automatically be included in the
vehicle protection zones and the indicators will flash accordingly.
When does the system trigger an alarm?
The alarm system is triggered, in the locked vehicle, when:
•
a door
•
the bonnet or
•
the tailgate
are unduly opened
•
or the ignition is switched on
Tips and Maintenance
Unlocking and locking
A
on the radio-frequency remote
2
Technical Data
79