Seat IBIZA Owner's Manual page 214

212 If and when
– Remove the plastic cover
A ⇒ page 211, fig. 153
plastic caps
B
screwdriver using the flat part of a screwdriver; avoid damage to
the paintwork.
A
– Extract the bolts
C
connector.
– Remove the light from its housing.
Rear lights on the tailgate: Access to the bulb
A ⇒ page 211, fig. 153
and the
A
carefully levering using a
⇒ page 211, fig. 154
and unplug the
Fig. 155 Rear light on
tailgate
Side light 1/ Fog light/ reverse light
A ⇒ fig. 156
– Unscrew the bolts
D
– Press and rotate the large lampholder to the left. In the case of a
small lamp, rotate and extract the lampholder and pull on the
lamp.
– Remove lamp and replace.
– Fit the lampholder and proceed with installation.
A
– Fit the caps and the plastic cover
B
Note
Ensure that all joints and rubber elements as well as the plastic caps
correctly fitted during installation.
Fig. 156 Access to the
lamp
and remove the lampholder.
A
⇒ fig. 155.
A
A
are
B