H3C LSW1SP4P0 User Manual page 23

Table 6 Optional cables for SFP+ transceiver modules
SFP+ cable
LSWM1STK
LSWM2STK
LSWM3STK
LSTM1STK
LSWM4STK
NOTE:
Before installing or removing a cable, wear an ESD-preventive
•
wrist strap and make sure that the strap is in good skin contact
and is properly grounded.
Horizontally insert the cable connector into the SFP+ port of the
•
switch.
To unplug the cable connector from the port, hold the cable
•
connector and pull the handle at the end of the connector.
Cable length
0.65 m (2.13 ft)
1.2 m (3.94 ft)
3 m (9.84 ft)
5 m (16.40 ft)
10 m (32.81 ft)
Description
The S5800 and S5820X
•
series switches support the
Intelligent Resilient
Framework (IRF) feature,
where physical connections
are required among
members. You can use SFP+
cables to connect the SFP+
ports.
SFP+ cables are applicable
•
to SFP+ ports of the
LSW1SP4P0 or
LSW1SP2P0.
SFP+ cables are hot
•
swappable.
18