Checks To Be Made Before Use - Parrot Sequoia User Manual

Irradiance
Parrot Sequoia Home
GPS
Instruments
Sunshine sensor
GREEN RED
24.324 400
Temperature
The Irradiance screen tells you about the light intensity of each band
(Green, Red, Red Edge, Near Infrared).
Temperature
Parrot Sequoia Home
GPS
Instruments
Sunshine sensor
Temperature
P7 P7MU P7
75° 65° 75°
Green Red RE
55° 54° 54°
The Temperature screen tells you about the temperature of all Sequoia's
parts.
Gallery
The Gallery screen can be used to retrieve the photos taken during your
flights. You can select the photos that you would like to view (All, RGB,
Green, Red, Red Edge and Near Infrared).
12
Status Gallery
RED EDGE NEAR IR
43.420 57.239
Status Gallery
Body
Wifi IMU
35° 50°
Sensors
NIR
54°
Sunshine sensor
IMU
50°
Media View
Parrot Sequoia Home
Media View
INTERNAL MEMORY
USED 35 Gb
AVAILABLE 28.5 Gb
The Media View screen tells you about the available space in Sequoia's
internal memory and on the SD card.

CHECKS TO BE MADE BEFORE USE

Before each flight with Sequoia, make the following checks:
• Make sure that the lenses are clean. Use the microfibre cloth (supplied)
to clean them.
• Free up enough memory (either in the multispectral sensor internal
memory, or on your SD card) so you can save all the photos taken
during the flight.
• Make sure that the two modules are properly attached to the drone
and that they are not likely to come off during the flight.
• Make sure that the micro USB device cable which connects the drone
to the multispectral sensor is connected.
• Make sure that the two sensors are calibrated. For more information,
see the Calibrating Sequoia section.
• Wait until the sunshine sensor indicator light is green. When it is green
this means that the GPS/GNSS is enabled.
Status Gallery
SD CARD
USED 1.3Gb
AVAILABLE 64 Gb
13