Technical Specifications; Sensor Resolution - Parrot Sequoia User Manual

FUNCTIONAL_MODE
IMAGE_SIZE
COMPRESSION_SETTING
WHITE_BALANCE
F_NUMBER
FOCAL_LENGTH
FOCUS_DISTANCE
Device Properties FOCUS_MODE
EXPOSURE_METERING_MODE
EXPOSURE_PROGRAM_MODE
DATETIME
STILL_CAPTURE_MODE
TIMELAPSE_NUMBER
TIMELAPSE_INTERVAL
FOCUS_METERING_MODE
Custom
GET_SUNSHINE_VALUES
GET_TEMPERATURE_VALUES
GET_ANGLE_VALUES
GET_GPS_VALUES
GET_GYROSCOPE_VALUES
GET_ACCELEROMETER_VALUES
Request GET_MAGNETOMETER_VALUES
GET_IMU_VALUES
GET_STATUS_MASK
START_MAGNETO_CALIB
STOP_MAGNETO_CALIB
MAGNETO_CALIB_STATUS
SEND_FIRMWARE_UPDATE
STATUS
Event
MAGNETO_CALIBRATION_STATUS
24
PHOTO_SENSORS_ENABLE_MASK
PHOTO_SENSORS_KEEP_ON
MULTISPECTRAL_IMAGE_SIZE
MAIN_BIT_DEPTH
Properties
MULTISPECTRAL_BIT_DEPTH
HEATING_ENABLE
WIFI_STATUS
WIFI_SSID
Refer to the documentation for your PTP or PTP/IP software (gphoto2 or
ptpcam for example).
For more information on the Sequoia PTP and PTP/IP protocols, see the
Integration Guide available in the Sequoia set up interface help section
and on www.parrot.com/uk/support.

TECHNICAL SPECIFICATIONS

Sensor resolution

The ground resolution of the RGB sensor and the multispectral sensor
depends on the height of the flight. Refer to the table below to determine
the flight height depending on the required resolution.
Ground resolution (cm/px)
Height (m) Monochrome
30
40
50
60
70
80
90
100
110
120
130
140
150
RGB
3.7 0.8
4.9 1.1
6.2 1.4
7.4 1.6
8.6 1.9
9.9 2.2
11.1 2.4
12.4 2.7
13.6 2.9
14.8 3.3
16.1 3.5
17.3 3.7
18.6 4.1
25