Canon AS-100M Field Service Manual page 97

5.5.2 8" FDD-I/F P.C.B.
(1) Replacement
© Remove housing plate ( (1) of paragraph 3.4.1 ).
© Disconnect grounding cable from 8" FDD-I/F P.C.B.
(|) Disconnect FDD signal cable and DC cable from 8"
FDD-I/F P.C.B.
© Disconnect SFDD cable from YD-180.
© Remove four locking support from 8" FDD-I/F P.C.B.
© After confirming set positions of replacing 8" FDD-I/F
P.C.B switches (see paragraph 4.2.2), mount 8" FDD-I/F
P.C.B according to opposite removal procedure.
(2) Adjustment
Confirm the operation with a test program.
5-20