Canon AS-100M Field Service Manual page 58

MAIN UNIT + 5" FDD
(T) After unpacking, set MAIN UNIT power switch to OFF (set downward).
Then, remove 5" FDD mounting hole cover caps from MAIN UNIT.
See Fig. 3.1.1.
0 Confirm set position of P.C.B switch i r i MAIN UNIT and 5"-FDD I/F P.C.B.
See paragraph 4.2.3. Then mount 5" FDD onn5" FDD boss of properly with
5" FDD mounting holes of MAIN UNIT.
(T) Connect keyboard cable, centronics and FDD cable to respective
connectors of MAIN UNIT as in Fig. 4.2.20.
( 0 Clamp both centronics cable and FDD cable, with connector lock pins.
(5) Connect 5" FDD power cable to its corresponding connector of MAIN UNIT,
and connect
UNIT.
Fig. 4.2.20
MAIN UNIT power cable to power supply receptacle of MAIN
Printer power cable
4-14