(ö)
Pull out power source unit from MAIN UNIT, and disconnect
AC input cable and grounding cable (Fig. 5.2.5) from
SWITCHING REGULATOR.
(T)
Remove four retaining screws of SWITCHING REGULATOR to
remove it.
(Fig. 5.2.5).
R e ta in in g screw
(For 230,240V)
(8)
Mount replaced SWITCHING REGULATOR in position, and connect
both AC input cable and grounding cable to SWITCHING REGULATOR
and 5" FDD connector to red CN5.
Fig. 5.2.5
5-6
Retaining screw
AC Input cable