Table of Contents
Advertisement
7.3
System and y-debugger commands
Two MSDOS and CP/M-86 system commands are available, depending on
the application of OS control.
Command concerning to hardware are described here, and for other
commands and their details, see MSDOS User's Guide of CP/M-86
User's Guide.
y-debugger commands are debugger commands designated in firmware.
7.3.1
MSDOS system commands
(1)
Control character commands
Each of control character commands is entered by
combination of |CRTLlkey with some specific key.
Each of these commands is applicable even when the CRT
display is not showing system prompt (for ex. A>).
Control characters
CTRL-C
CTRL-P
CTRL-P
CTRL-S
CTRL-CANCEL
CTRL-ALTER-DELETE
CTRL- A -CLEAR
U
SCREEN
Description of controls
Return ot system from execution program
(control is effective when input of
program output.
Halt hard copy operation.
Restart hard copy operation.
Temporary stop (release is by any key).
Same as CTRL-C (command clears previous data
entry).
Software reset (excecute at IPL)
Hard copy.
7-3
Advertisement
Table of Contents
