Canon AS-100M Field Service Manual page 118

. When Gn is not designated, copy onto a current user
number file.
STAT (Status Display)
STAT . — .d: . (d means drive number)
CRT display shows floppy disk status.
. When"d"is not designated, the status of each of the entire
usable floppy disk drives is displayed.
. Status over the usable area is given in the K-byte unit.
STAT w 1st parameter > - < SIZE
Attribute of file is displayed as follows:
. When SIZE is omitted, the file size is not displayed.
File size
,
Attribute
STAT — 1st parameter —
RO : Read only
RW : Read/Write
SYS: System access
DIR: Directory access
Specify attribute of file
• No omission of both RO/RW and SYS/DIR*
STAT w d :
Status of the designated floppy disk drive (DSK) or a
user number (USR) is displayed.
No. of records File capacity
.
File name
1
These two cannot be specified
] at the same time.
These two cannot be specified
at the same time.
DSK:
USR:
7-12
FCB num^er
(File Control Block)