Canon AS-100M Field Service Manual page 60

MAIN UNIT + 8" FDD
IMPACT or COLOR PRINTER
d o t
KEYBOARD
(l) After unpacking, set power switch of MAIN UNIT and 8" FDD
to OFF, confirm set positions of P.C.B switches in MAIN UNIT
and 8n FDD-I/F P.C.B.
cable, centronics cable, and 8" FDD cable to respective conneectors
of MAIN UNIT, as in Fig. 4.2.21.
(?) Clamp both centronics cable and 8" FDD cable with connector
lock pinsc
(3) Connect main unit power supply cable and 8" FDD power supply
cable to their corresponding receptacle.
4
( ^ ) After checking that printer power switch set to OFF, connect
printer power supply cable to AC power receptacle.
5
( ) Clamp printer grounding cable to the part below printer power
supply cable.
cable with grounding cable retaining screw of MAIN UNIT.
Printer power cable
Fig. 4,2,21
See parapraph 4*2.3. Connect KEYBOARD
Then, lock it together with 8" FDD grounding
4-16
Centronics cable