Part Identification Chart - Weslo Pursuit CT 2.4 User Manual

PART IDENTIFICATION CHART

Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the
key number is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it
has been preassembled. Extra parts may be included.
M8 Locknut M8 Acorn M8 Curved
M8 Large
Nut (42)–6 Washer (17)–10
(9)–3
Washer (49)–3
M5 x 20mm
M5 x 10mm M5 x 14mm M8 x 16mm
Screw (27)–2
Screw (2)–4 Screw (38)–1 Screw (22)–4
M8 x 65mm
M8 x 65mm Bolt
(16)–2 Carriage Bolt (18)–4
6