Part Identification Chart - Weslo Pursuit upright User Manual

PART IDENTIFICATION CHART

Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the
key number is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it
has been preassembled. Extra parts may be included.
M8 Split
M8 Locknut M8 Acorn Nut M8 Curved
M8 Washer
Washer (14)–7
(46)–4 Washer (61)–11
(45)–5
(60)–5
M5 x 12mm M4 x 16mm
M8 x 16mm M8 x 30mm
Screw (62)–2 Flange Screw
Screw (47)–3 Screw (13)–2
(69)–2
M8 x 65mm M8 x 65mm
Bolt (68)–2 Carriage Bolt (48)–4
6