Weslo Pursuit CT 2.4 User Manual page 13

12. While a second person holds the Console (1)
near the Upright (35), connect the wire on the
Console to the Upright Wire (36).
Tip: Avoid pinching the wires. Attach the
Console (1) to the Upright (35) with four M5 x
10mm Screws (2); start all the Screws, and
then tighten them.
13. Identify the Right Pedal (33).
Using an adjustable wrench, firmly tighten the
Right Pedal (33) clockwise into the right side of
the Crank (3).
Firmly tighten the Left Pedal (not shown)
counterclockwise into the left side of the
Crank (not shown). IMPORTANT: You must
turn the Left Pedal counterclockwise to
attach it.
Attach the right pedal strap to the Right Pedal
(33) as shown. Attach the left pedal strap in
the same way.
14. After the exercise bike is assembled, inspect it to make sure that it is assembled correctly and that it
functions properly. Make sure that all parts are properly tightened before you use the exercise bike.
Extra parts may be included. Place a mat under the exercise bike to protect the floor.
12
Avoid pinching
the wires
13
13
1
36
35
2
Strap
3
33