Weslo Pursuit CT 2.4 User Manual page 9

4. Attach the Seat (45) to the Seat Post (44) with
three M8 Locknuts (9) and three M8 Large
Washers (49); start all the Locknuts, and then
tighten them.
5. Loosen and remove the Seat Knob (24).
Next, insert the Seat Post (44) into the Seat Post
Sleeve (26), and then insert the Seat Knob (24)
into the Frame (23) and into an adjustment hole
in the Seat Post. Move the Seat Post upward
or downward slightly to make sure that the
Seat Knob is engaged in one of the adjust-
ment holes in the Seat Post. Then, tighten the
Seat Knob.
4
45
44
49
9
5
44
26
23
9
Adjustment
Holes
24