Replacing The Pad Assy - Fujitsu SCANSNAP S1300I Operator's Manual

Replacing the Pad Assy

Replace the pad assy in the following procedure.
1.
Unplug the cables from the ScanSnap.
2.
Remove all documents from the ADF paper chute (cover).
3.
Pull the ADF release tab to open the ADF top section.
ADF paper chute (cover)
ADF top section
4.
Remove the pad assy.
Squeeze both ends of the pad assy and pull it out in the direction of the arrow.
ADF top section
Pad assy
407
Replacing the Pad Assy
ADF release tab