Fujitsu SCANSNAP S1300I Operator's Manual page 44

2.
Open the ADF paper chute (cover) of the ScanSnap to turn the power
on.
 The [Scan] button flashes in blue. The button returns to being lit normally when
document scanning is enabled.
The ScanSnap Manager icon changes as shown below.
From
From
ATTENTION
With some computers, the initialization of the ScanSnap may be performed several times when the
computer is started up.
HINT
There may be a slight delay before the ScanSnap Manager icon changes to
on your computer's performance, operating environment, and load such as when multiple programs
are running at the same time.
to (
for USB bus power cable connection
to (
for USB bus power cable connection)
44
Turning the ScanSnap ON/OFF
).
.
or , depending