Fujitsu SCANSNAP S1300I Operator's Manual page 125

Procedures
ATTENTION
When you perform a scan with [JPEG(*.jpg)] selected for [File format] in the [File option] tab of the
ScanSnap setup dialog box, you cannot save the image in Rack2-Filer Smart.
HINT
To use the Quick Menu, you need to select the [Use Quick Menu] check box in the ScanSnap setup
dialog box.
For details about how to perform scanning by using the Quick Menu, refer to
Flow" (page 92).
1.
Load a document in the ScanSnap.
For details, refer to
2.
Press the [Scan] button on the ScanSnap to start a scan.
 The Quick Menu appears when the scanning is completed.
To change the settings for [Scan to Rack2-Filer Smart], move the mouse cursor to the
[Scan to Rack2-Filer Smart] icon
change the settings,
ATTENTION
 You cannot start scanning when the Quick Menu is displayed. Save the scanned image to
Rack2-Filer Smart before scanning another document.
 Do not move, delete or rename the scanned image in other applications when the Quick Menu is
displayed.
Using ScanSnap with the Quick Menu (for Windows Users)
"How to Load Documents" (page
, and then click
"Preferences" (page
125
"Basic Scanning Operation
50).
. For details about how to
127).