Cleaning The Outside Of The Scansnap - Fujitsu SCANSNAP S1300I Operator's Manual

Cleaning the Outside of the ScanSnap

Clean the outside of the ScanSnap, the ADF paper chute (cover), and the ADF top section.
How to perform cleaning
1.
Unplug the cables from the ScanSnap.
2.
Clean the outside of the ScanSnap with a dry cloth, or a cloth
moistened with Cleaner F1/mild detergent.
ATTENTION
 Never use paint thinner or any other organic solvents.
 Be careful not to get any moisture or water inside the scanner during cleaning.
 It may take a long time for Cleaner F1 to dry if an excessive amount is used. Moisten the cloth
with moderate quantity. Wipe off the cleaner completely to leave no residue on the cleaned parts.
Cleaning the Outside of the ScanSnap
Cloth
Mild detergent or
Cleaner F1
Thinner
398