Maintenance; How To Clean Your Ceiling Fan Blades; Blade Cleaning - Fanimation The Odyn Owner's Manual

How to Operate Your Ceiling Fan
4. The remote buttons function as follows:
Fan speed:
I = minimum speed
III = medium low speed
V = medium high speed
: Turns the fan off.
: Controls fan direction - forward and reverse.
: Controls light on/off button.
5. The receiver provides the following protective function:
Lock position: The DC motor has a built-in safety feature
against blade obstruction during operation. If something
obstructs the fan blades the motor will stop operating after
30 seconds of interruption. Please remove obstacles and
reset.
Over 80W protection: When the receiver detects motor
power consumption which is greater than 80W, the
receiver power will shutdown and fan operation will cease.
Disconnect the power supply and after 5 seconds return-
power on to the fan.
Periodic cleaning of your new ceiling fan is the only
maintenance that is needed.
When cleaning, use only a soft brush or lint free cloth to
avoid scratching the finish.
Abrasive cleaning agents are not required and should be
avoided to prevent damage to finish.
Periodic light dusting of the blades is recommended.
(Figure 4)
II = low speed
IV = medium speed
VI = high speed

Maintenance

Blade Cleaning

12
CAUTION
Do not use water when cleaning your ceiling fan. It
could damage the motor or the blades and create the
possibility of electrical shock.
Avoid using water, cleansers, or harsh rags, which can
warp and ruin the blades.
(continued)
Figure 4