Administrator Settings-Ip & Vlan, Touch - Cisco TelePresence SX20 User Manual

82
Settings
Administrator Settings—IP & VLAN, Touch
To exit
Administrator
Settings, tap
Back.
To exit Settings
as such, tap
Exit.
Note that there
is no Cancel
function letting
you exit the
menu undoing
any changes you
have made.
Take care!
About IP Settings
You may specify whether to use IPv4
or IPv6 and whether to use static IP
address or DHCP.
When set to Static, applicable
addresses must be set accordingly.
Caution! There is no Cancel
function letting you exit the menu
undoing any changes you have
made. Take care!
D1534504 User Guide
Cisco TelePresence
Produced: November 2016 for CE 8. 2
All contents © 2010–2016
Cisco Systems, Inc. All rights reserved.